This item has been sold, but we have similar available

Stunning Bespoke Handmade Burr Walnut Marquetry Dining Table & 12 Chairs

Stunning Bespoke Handmade Burr Walnut Marquetry Dining Table & 12 Chairs

Stunning Bespoke Handmade Burr Walnut Marquetry Dining Table & 12 Chairs


Keep updated on our latest arrivals

Be the first to receive the latest vintage finds, enjoy interior inspiration and unearth furniture with real soul

About this item

A truly fabulous bespoke handmade Victorian style marquetry dining table and chair set.

There is no mistaking the classic and sophisticated design of this gorgeous Victorian style burr walnut dining table with marquetry decoration and set of 12 walnut chairs. This huge table has four  leaves and will comfortably seat fourteen. This grand table is sure to be a hit with all of your guests this holiday season.

This stunning table would also be appropriate for a conference room. Whatever its function, it will make a profound impact on your dinner guests or clients and will receive the maximum amount of attention wherever it is placed.

The table is made from burr walnut which is not only strong, but has a beautiful grain. To highlight the grain, this table has been French polished. A French polish is an alcohol and shellac polish for wood. It takes a lot of patience, but it is one of the most beautiful finishes available, producing an exceptionally high gloss.

The table has four leaves which can be added or removed as required to suit the occasion  by a special double wind out mechanism. When completely wound in, the table is transformed into a 5ft round dining table.

It stands on five elegant legs for extra stability and they terminate in brass cap castors

The table top has exquisite marquetry decorations. These regal decorations include bouquets of beautiful flowers, vases, swirls and geometric designs.

The set of twelve chairs comprise ten side chairs and a pair of armchairs. They are hand carved solid walnut with beautiful leather upholstery and brass studs. They compliment the dining table perfectly.


This is a new bespoke handmade table and chair set.

The making of a marquetry masterpiece

The making of a bespoke marquetry dining table involves many phases - carried out with the highest level of attention to detail - by third generation master craftsmen in our workshop in Italy.

First the design of the marquetry is drawn on paper.

The paper is then glued on to a sheet of plywood and the veneers are attached to the underside with pins.

There can be a maximum of 16 sheets of veneer.  In this case, there are 8 for the burr walnut and 8 for the marquetry.

With a fret cutter, using a very fine blade, the marquetry is cut out, using the burr walnut and various coloured veneers to compose the flowers. Today we use an electric fret cutter, although in the 18th and 19th centuries the cutters were operated by treadles.

All of the cut out pieces of veneer are then placed on a large tray.

They are then singed by being placed in hot sand in a red hot crucible. This singed effect gives different shades to the various veneers, depending on how deep and how long they are left in the hot sand.

The various items of veneer are then inserted into the burr walnut one by one. After they are inserted, tape is placed over them to keep them in place. They are then turned over and a sheet of glued paper is placed over them all, after which the tape can be removed.

The prepared solid mahogany table is then veneered with mahogany - twice on the under side, horizontally and vertically, and then once on the top side.

The prepared marquetry and burr walnut sheet is then placed on top and the whole table top is placed into a hot press, which glues the sheet to the top.

The backing paper can then be sanded off.

The table top is then veneered 4 times to prevent the top from bowing or warping.

Once the assembly is complete, the table is French polished by hand using natural products, resulting in a stunning bespoke masterpiece of marquetry.

Dimensions in cm:

Height 79 x Width 430 x Depth 150 - Fully extended

Height 79 x Width 150 x Depth 150 - With all leaves removed

Dimensions in inches:

Height 2 feet, 7 inches x Width 14 feet, 1 inch x Depth 4 feet, 11 inches - Fully extended

Height 2 feet, 7 inches x Width 4 feet, 11 inches x Depth 4 feet, 11 inches - With all leaves removed

“Burr Walnut” refers to the swirling figure present in nearly all walnut when cut and polished, and especially in the wood taken from the base of the tree where it joins the roots. However the true burr is a rare growth on the tree where hundreds of tiny branches have started to grow. Burr walnut produce some of the most complex and beautiful figuring you can find.

Marquetry is decorative artistry where pieces of material (such as wood, mother of pearl, pewter, brass silver or shell) of different colors are inserted into surface wood veneer to form intricate patterns such as scrolls or flowers.

Winding Mechanism for extending tables
A man by the name of Samuel Hawkins applied for a patent on a screw expander on June 6th, 1861. Presumably, Mr. Hawkins either died or retired because his business was taken over by a young machinist named Joseph Fitter  in 1864.
Joseph Fitter operated a machinist shop where he produced winding mechanisms for extending tables as well as screw expanders for piano stools and other applications at 210 Cheapside, Birmingham England by the name of Britannia Works.



W430.0 x H79.0 x D150.0 cm



Date of manufacture





VAT status

Seller is VAT registered


Icon shield blue
Choose from over 1,700 Vinterior trusted dealers
Icon padlock blue
100% secure payment by card or using your device

Payment methods supported by Vinterior

Icon tick blue
Direct communication with dealers and customer service